Why You Need To Put A Raspberry Pi CM4 Inside Your PSP Right Now!
TLDRIn this exciting modding journey, a classic PSP is transformed into a powerful emulation handheld by integrating a Raspberry Pi Compute Module. The project, created by modder Adam, retains the original PSP's design and hardware while offering increased gaming capabilities. The mod is reversible, simple to install, and open-source, with future updates promised, including support for more emulators and additional features.
Takeaways
- 🎮 The PSP 6 is a mod that combines a classic PSP with a Raspberry Pi Compute Module, creating a powerful emulation handheld.
- 🔧 The mod is designed to be reversible, with no shell trimming or soldering required, preserving the original hardware components of the PSP.
- 💻 The project is the brainchild of Adam, also known as Another Mod, who has a history of creating projects centered around the Raspberry Pi.
- 📱 The PSP 6 main board is compatible with the 1000 model PSP, but not with the 2000, 3000, PSP Go, or E1000 models.
- 🔋 A 2000 milliamp lithium-ion battery is used to power the console, and the mod also includes a thermal pad to manage the Raspberry Pi's heat.
- 🖥️ The mod utilizes a new IPS screen with improved response rate, color, brightness, and resolution compared to the original PSP screen.
- 🔄 The mod supports the Retro Pi OS, with Adam working on adding support for other operating systems like Ubuntu and Raspberry Pi OS.
- 🎮 The PSP 6 is compatible with a wide range of emulators, with support for the original PlayStation and Nintendo 64, and future plans to add a PSP emulator.
- 🔧 The mod is open-source, allowing community contributions and ensuring the project's longevity.
- 🛠️ Adam plans to continue working on the PSP 6, adding features like sleep mode, Wi-Fi control, and extra joystick and buttons.
- 🛒 Adam has set up a web store where the PSP 6 mod kits will be available for purchase, with options ranging from basic boards to fully assembled units.
Q & A
What is the main concept behind the PSP mod described in the transcript?
-The main concept is to integrate a Raspberry Pi compute module into a classic PSP console, transforming it into a powerful emulation handheld that retains the original PSP's design and controls while enhancing its capabilities with the Raspberry Pi's computing power.
Who is the creator of the PSP mod project?
-The creator of the PSP mod project is Adam, also known as Another Mod.
What are some of the original PSP hardware components that are utilized in the mod?
-The mod utilizes several original PSP hardware components, including the button PCBs, the membrane Wi-Fi antenna, the shell, and the metal frame.
Is the PSP mod project reversible?
-Yes, the PSP mod project is completely reversible, with no shell trimming or soldering required.
What is the compatibility of the PSP mod with different PSP models?
-The PSP mod is only compatible with the 1000 model PSPs. It is not compatible with the 2000, 3000, PSP Go, or the E1000 model.
What is the purpose of the Raspberry Pi compute module interface board in the mod?
-The Raspberry Pi compute module interface board is needed if you choose to use a CM4 as your Raspberry Pi option. It is also compatible with a Pi Zero, but an interface board isn't required in that case.
What type of screen does the PSP mod use?
-The PSP mod uses a brand new IPS screen, which offers better response rate, color, brightness, and higher resolution compared to the original PSP screen.
What is the battery specification used in the PSP mod?
-A 2,000 milliamp lithium-ion battery with a JST connector is used to power the console.
How long does it take to install the Retro Pi OS on the PSP mod?
-The installation process of the Retro Pi OS on the PSP mod can take quite a while, but the exact time is not specified in the transcript.
What are some of the software features of the PSP mod?
-The software features of the PSP mod include on-screen graphics for volume and brightness controls, battery level and mute indicator, and support for various emulators through the custom Retro Pi image created by Adam.
What are the future plans for the PSP mod project?
-Adam plans to add sleep mode, Wi-Fi control, and code for an extra joystick and some extra buttons. He also intends to work on adding support for other operating systems and emulation front ends, and is considering the potential for increased compatibility with more resource-intensive emulators as new compute modules are released.
Outlines
🎮 Resurrecting a Classic: PSP and Raspberry Pi Fusion
The paragraph introduces a creative project that combines a classic PSP with a Raspberry Pi compute module, aiming to create a unique gaming experience. The host, Tito, welcomes the audience to a special Halloween episode and introduces Adam, the modder behind the project. Adam discusses his passion for Raspberry Pi projects and his journey in modding, emphasizing the use of the PSP's original hardware components alongside the Raspberry Pi's capabilities. The project is presented as reversible and non-destructive, highlighting the talent of the modder.
🛠️ Building the PSP 6: Components and Installation
This paragraph delves into the specifics of building the PSP 6, detailing the parts required and the installation process. The host explains the compatibility with 1,000 model PSPs and the need for a Raspberry Pi.赞助商 iFixit is introduced as a supporter of the project, promoting the right to repair and the reduction of electronic waste. The paragraph concludes with a cautionary note on the delicate nature of the PSP's UMD drive door hinge during disassembly.
🎵 Modding the PSP: Installation Steps and Precautions
The focus of this paragraph is on the actual modding process, including the installation of the headphone board, PSP main board, and the Raspberry Pi compute module interface board. The host provides a step-by-step guide, emphasizing the importance of routing the Wi-Fi antenna correctly and insulating the Raspberry Pi's IO pin holes to prevent short circuits. The paragraph also highlights the use of a new IPS screen for improved display quality and a 2,000 milliamp lithium-ion battery for power.
📱 Operating System Installation and Software Features
The paragraph discusses the installation of the Retro Pi OS on the PSP 6. The host explains the process of using RPI boot and Raspberry Pi Imager to recognize the PSP as a storage device and burn the custom Retro Pi image created by Adam. The tutorial covers the initial setup and the need to switch the PSP back to SD storage mode after the OS installation. The paragraph also touches on the software features, including on-screen graphics for volume and brightness controls, battery level indicator, and mute functionality.
🕹️ PSP 6 Features and Future Developments
This paragraph highlights the hardware and software features of the PSP 6 mod, including the use of existing PSP buttons and interfaces. The host discusses the mod's compatibility with various emulators and the potential for future support of other operating systems and front ends. Adam shares his plans for future developments, including adding sleep mode, Wi-Fi control, and extra joystick and buttons. The paragraph concludes with a mention of the web store where the PSP 6 kits will be available for purchase.
🎉 Conclusion and Future of the PSP 6 Project
The final paragraph wraps up the video with the host's enthusiasm for the PSP 6 as a new favorite way to enjoy retro gaming. Adam provides a sneak peek into upcoming projects, including finishing touches on firmware and drivers, and potential revisits to other projects. The host encourages viewers to follow Adam for updates and thanks the audience for watching, signing off with well wishes for Halloween and a promise to return with more content.
Mindmap
Keywords
💡PSP
💡Raspberry Pi
💡Motherboard Transplant
💡Retro Gaming
💡Modding
💡Emulation
💡Compute Module
💡No Cut Mod
💡Open Source
💡RetroPie
Highlights
Fusion of vintage gaming and cutting-edge technology with a creative twist.
Resurrecting the classic PSP with a Raspberry Pi compute module transplant.
The project maintains the PSP's robust original hardware components like controls and speakers.
The mod is completely reversible with no shell trimming or soldering required.
Adam, the modder, uses the original PSP hardware like button PCBs and the shell.
The PSP mod utilizes a new IPS screen for better response rate, color, brightness, and resolution.
The mod is compatible with the 1000 model PSP only, not with later models or the PSP Go.
The PSP mod integrates a Raspberry Pi compute module, enhancing the console's capabilities.
The project is the brainchild of Adam, a talented modder known for his Raspberry Pi projects.
Adam's design allows for future upgrades, making the mod potentially compatible with new compute modules.
The mod supports RetroPie, with custom images and support for other operating systems planned.
The PSP's Wi-Fi switch is repurposed to allow performance or low-power modes.
The USB mini port retains the PSP's original aesthetics and charges the console.
The project is open-source, encouraging community contributions and ensuring its longevity.
Adam plans to add sleep mode, Wi-Fi control, and extra joystick and buttons in future updates.
The PSP mod is a new favorite for enjoying retro gaming on the go, combining form and function.